Nederlands 
Deutsch 
Français 
Italiano 
Español 
Which O-ring do I need for XENON?
NBR O-rings and EPDM O-rings are the best option for contact with XENON, based on chemical resistance and relative cost. HNBR, VMQ, FPM, FEP, FVMQ, AU and FFKM O-rings offer the same chemical resistance to XENON with a maximum swelling of less than 15%, but at a higher cost than NBR and EPDM. Do not use PTFE O-rings for XENON, as these materials are not recommended or have not been tested for resistance to XENON.
Which O-ring do I need for XYLAMON, WOOD PRESERVATIVE?
PTFE O-rings are the best option for contact with XYLAMON, WOOD PRESERVATIVE, based on chemical resistance and relative cost. FFKM O-rings offer the same chemical resistance to XYLAMON, WOOD PRESERVATIVE with a maximum swelling of less than 15%, but at a higher cost than PTFE. FPM and AU O-rings are less resistant to XYLAMON, WOOD PRESERVATIVE and should only be used after checking the application conditions. Do not use NBR, EPDM, HNBR, VMQ, FEP and FVMQ O-rings for XYLAMON, WOOD PRESERVATIVE, as these materials are not recommended or have not been tested for resistance to XYLAMON, WOOD PRESERVATIVE.
Which O-ring do I need for XYLENE?
PTFE O-rings are the best option for contact with XYLENE, based on chemical resistance and relative cost. FFKM O-rings offer the same chemical resistance to XYLENE with a maximum swelling of less than 15%, but at a higher cost than FVMQ and PTFE. FPM O-rings are less resistant to XYLENE and should only be used after checking the application conditions. Do not use NBR, EPDM, HNBR, VMQ, FEP and AU O-rings for XYLENE, as these materials are not recommended or have not been tested for resistance to XYLENE.
Which O-ring do I need for XYLIDENES-MIXED-AROMATIC AMINES?
EPDM O-rings are the best option for contact with XYLIDENES-MIXED-AROMATIC AMINES, based on chemical resistance and relative cost. FFKM O-rings offer the same chemical resistance to XYLIDENES-MIXED-AROMATIC AMINES with a maximum swelling of less than 15%, but at a higher cost than EPDM. FEP, NBR and HNBR O-rings are less resistant to XYLIDENES-MIXED-AROMATIC AMINES and should only be used after checking the application conditions. Do not use VMQ, FPM, FVMQ, AU and PTFE O-rings for XYLIDENES-MIXED-AROMATIC AMINES, as these materials are not recommended or have not been tested for resistance to XYLIDENES-MIXED-AROMATIC AMINES.
Which O-ring do I need for XYLIDINE?
FFKM O-rings are the best option for contact with XYLIDINE, based on chemical resistance and relative cost. These materials offer chemical resistance to XYLIDINE with a maximum swelling of less than 15%. FEP and NBR O-rings are less resistant to XYLIDINE and should only be used after checking the application conditions. Do not use EPDM, HNBR, VMQ, FPM, FVMQ, AU and PTFE O-rings for XYLIDINE, as these materials are not recommended or have not been tested for resistance to XYLIDINE.
Which O-ring do I need for XYLOL?
FPM O-rings are the best option for contact with XYLOL, based on chemical resistance and relative cost. FFKM O-rings offer the same chemical resistance to XYLOL with a maximum swelling of less than 15%, but at a higher cost than FPM and FVMQ. Do not use NBR, EPDM, HNBR, VMQ, FEP, AU and PTFE O-rings for XYLOL, as these materials are not recommended or have not been tested for resistance to XYLOL.