430.000.000+ O-rings in stock
Fast delivery
Nederlands 
Deutsch 
Français 
Italiano 
Español 
O-ring Lubry Free Coating is a fluorine-free, PFAS-free impregnating lubricant developed for applications in which a PFAS-free solution is required. The term “fluorine-free” is stated alongside PFAS-free status and identifies the treatment as an option intended for projects where these substances must be excluded. The description “impregnating lubricant” defines the type of surface treatment, but the supplied information does not explain the impregnation method, application equipment, processing sequence or treatment depth. These details should therefore not be assumed. The source also does not describe the lubricant’s chemical composition beyond its fluorine-free and PFAS-free character, nor does it provide numerical friction values or assembly data. The treatment should consequently be presented according to the facts that are confirmed: it is an impregnating lubricant, it is described as fluorine-free, and it is intended for applications requiring a PFAS-free solution. Its regulatory compliance, surface finish, temperature range and elastomer compatibility are addressed separately so that each technical characteristic remains connected to the section where it is most relevant.
The treatment complies with FDA regulations. This compliance is one of the two regulatory properties explicitly stated in the source and may be relevant where defined FDA requirements form part of the coating specification. The available information does not identify a particular FDA regulation number, test report, application category, contact condition, exposure duration or temperature limitation connected specifically to that compliance. These details should therefore not be added or inferred. The source also does not state that every finished O-ring automatically meets all FDA requirements for every application. The most accurate description is that the coating complies with FDA regulations within the scope of the supplied information. The complete O-ring specification, including the elastomer compound and intended operating conditions, may still need to be considered for a particular project. FDA compliance should therefore be treated as a confirmed property of the treatment rather than as a universal guarantee of suitability, certification or regulatory acceptance for every finished component or application.
The coating also complies with KTW-BWGL regulations. This is the second specific regulatory reference provided in the source information and should be presented without adding approval numbers, test conditions or application limits that have not been supplied. The source does not define contact conditions, exposure time, component geometry, test method or any restrictions associated with the stated compliance. It also does not confirm that the coating alone determines whether a complete O-ring meets every requirement that may apply within a particular project. The confirmed fact is that the treatment complies with KTW-BWGL regulations. For a specific sealing requirement, that regulatory property can be reviewed together with the O-ring dimensions, elastomer material and expected operating conditions. KTW-BWGL compliance should therefore be described as an established characteristic of the treatment, while avoiding broader claims about approval scope, certification documentation or guaranteed acceptance. No additional regulatory framework, approval or application category is identified in the supplied information.
The treatment provides a transparent, dry finish and operates between -40°C and +100°C. Transparency describes the stated appearance of the treated surface, while the dry finish identifies its final surface condition. The source does not provide a gloss level, colour variation, coating thickness or visual description beyond these two characteristics, so no further appearance claims should be introduced. The temperature values define the stated operating range of the treatment. No separate limits are provided for continuous exposure, short-term exposure, different media or changing temperature conditions, and the range should therefore be used exactly as supplied. Elastomer compatibility covers all compounds except silicone. Silicone is the only stated exclusion, while no individual compatible elastomer types, hardness levels, compound grades or test conditions are listed. Finish, temperature range and compatibility are separate selection factors. Each should be considered together with the complete O-ring specification and intended application before the treatment is selected or quoted.
Request a personalised quotation for O-ring Lubry Free Coating by providing the O-ring dimensions or complete product specifications, the elastomer material and the required quantity. Please also include the intended application, expected operating temperature and any FDA or KTW-BWGL requirements that should be considered. Because silicone is excluded from the stated compatibility, the elastomer compound should be identified clearly. The supplied information can then be reviewed before a quotation is prepared. This review does not guarantee suitability, availability, pricing, delivery time, regulatory acceptance or technical performance for a particular use. To discuss a PFAS-free treatment for your O-rings, contact the team or submit a quotation request with the relevant product and application details.